Paste-in import: one CIDR/IP per line, optional comment after '#',
blank/comment-only lines ignored - matches the format used by common
public blocklist feeds (Spamhaus DROP, blocklist.de, etc.) so those can
mostly be pasted in directly. Whole batch gets one list_type (allow or
block). Reuses the existing single-entry validation, skips duplicates
(by list_type+CIDR, including within the same paste), caps at 5000 lines,
and reports imported/skipped/invalid counts plus per-line errors.
New route: POST /firewall-lists/entries/import (admin-only). UI: a
collapsible "Bulk import" section on the Global Firewall Lists page.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
New model.IPListEntry + jsondb CRUD, independent of any single WireGuard
server. firewall.GenerateGlobalRuleset builds an nftables table
(wireguard_ui_global) with allow/block sets evaluated at priority -10 -
before every per-server table - so it applies to all traffic on the host,
not just WireGuard. Allow entries always win over block entries.
firewall.ApplyGlobal loads it live via `nft -f`, scoped to that one table.
New "Global Firewall Lists" page (nav entry under Settings): add/delete
entries, ruleset preview, "Apply now (live)" with an explicit confirm()
warning since this affects the whole host's firewall, not just one server.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
New system package checks `apt list --upgradable` against the current
package index (no apt update triggered) and the reboot-required marker
file. Read-only - never installs or upgrades anything. Shown as a card
on the About page with a manual "Check now" refresh.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
New model.FirewallRule + jsondb CRUD (GetFirewallRules/CreateFirewallRule/
UpdateFirewallRule/DeleteFirewallRule), scoped per server. firewall package
now generates a full ruleset (baseline + enabled custom rules) and can
apply it live via `nft -f` (firewall.Apply), scoped to a per-server
nftables table (wireguard_ui_<serverID>) so applying one server never
touches another server's rules or any pre-existing firewall state.
New endpoints: GET/POST /servers/:id/firewall/rules, POST .../rules/:ruleId,
POST .../rules/:ruleId/delete, POST .../apply (live, admin-only). UI in the
All Servers page: rule table with add/delete, ruleset preview, and an
"Apply now (live)" button with an explicit confirm() warning before it
touches the running firewall.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
New firewall package generates an nftables snippet (INPUT accept for the
listen port, FORWARD rules for the WireGuard interface, optional LAN
forwarding via a new ServerSetting.LanInterface field). Text only -
nothing is applied to the live firewall. Exposed as GET
/servers/:id/firewall-preview and a "Firewall Preview" button in the
All Servers page.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
DeleteServer already existed in the store layer (refuses if clients
still reference the server) but was never wired up anywhere, so there
was no way to actually remove a server from the UI or API.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Deletes /wg-server (route, handlers, template) entirely and adds generic
/servers/:id/interface and /servers/:id/keypair endpoints + UI in the
All Servers page, so every server (including the default one) is managed
through the same per-server registry. Drops the write-through dual-write
hacks that kept the old single-server collection in sync - the registry
is now the single source of truth. One-time legacy-install migration path
is untouched.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
New POST /backup/download (admin-only) tars the whole jsondb directory
(all servers/clients/users/settings) and streams it back as a file
download. If a passphrase is given, the archive is encrypted first
(AES-256-GCM, scrypt-derived key, backup/encrypt.go) - a small
self-contained format, not gpg/OpenPGP-compatible, to avoid shelling
out to an external binary or adding a PGP dependency.
Deliberately does NOT upload anywhere automatically (e.g. to
Nextcloud) - the archive only ever leaves the server as this one HTTP
response to the requesting admin, who is responsible for storing it
themselves. New "Download Backup" button + passphrase modal on the
Global Settings page.
New servers previously got a bare ConfigFilePath default with no way
to set/edit EndpointAddress, FirewallMark, or Table afterward. Adds
GET/POST /servers/:id/settings (view/save ServerSetting, admin-only
for writes) and a "Settings" button + modal on each server card in
servers.html. CreateServer now seeds FirewallMark/Table with the same
defaults the legacy single-server bootstrap uses, instead of leaving
them blank.
Real per-server data isolation, the core ask behind the access-control
work: clients, config generation, and the client-management UI are now
scoped by server ID instead of implicitly operating on one global
"the server".
- util.DefaultServerID ("wg0") is the server every legacy bare route
now resolves to, so old and new routes share one consistent identity
instead of drifting apart.
- New /servers/:id/... routes (new-client, update-client, remove-client,
set-status, download, api/clients, api/client/:cid, api/apply-wg-config)
reuse the same handlers as the legacy routes via resolveServerID(c),
gated by RequireServerAccess middleware. Cross-server edits/deletes on
scoped routes are rejected (403) if a client belongs to a different
server.
- Fixes a real data leak: ApplyServerConfig previously wrote ALL clients
from ALL servers into whichever single wg.conf it targeted. It now
filters clients by server ID before generating a config, and resolves
each server's own ConfigFilePath/EndpointAddress via the new
ServerSetting record instead of the app-wide GlobalSetting.
- WireGuardServerInterfaces/WireGuardServerKeyPair/GlobalSettingSubmit
(the legacy /wg-server and /global-settings edit routes) now write
through to the new per-server registry record for "wg0" in addition
to the legacy collection, so the two stay in sync until the legacy
routes are eventually retired.
- New templates/server_clients.html: per-server clone of clients.html
wired to the scoped endpoints, with a server name/id heading.
- base.html's shared "New Client" and "Apply Config" actions (used by
every page's nav buttons) now target the scoped route when a
serverID is present on the page, instead of always hitting the
legacy default-server endpoint regardless of which server's client
page is open.
Legacy bare routes (/, /new-client, /wg-server, ...) are untouched and
still fully functional against the default "wg0" server - nothing was
removed yet, per the incremental-delivery approach for this project.
New admin-only page at /servers-settings (templates/servers.html) lists
servers and creates new ones via POST /servers (ID/name/interface/
addresses/port, key pair generated server-side). Nav gets a "Servers"
link.
templates/users_settings.html gains a multi-select "Server Access"
field wired to the server_ids support added to create-user/update-user
in the previous commit, so admins can now actually assign non-admin
users to specific servers through the UI.
Non-admin users are now restricted to servers explicitly listed in
their new ServerIDs field; empty means no access (secure by default).
Admins always have full access. Migration backfills existing users'
ServerIDs with the migrated legacy server so nobody is locked out on
upgrade. New RequireServerAccess middleware enforces this on
/servers/:id/... routes (applied to GET /servers/:id/clients so far);
GET /servers also filters its list for non-admins.
GET /servers lists registered servers; GET /servers/:id/clients returns
that server's client list (filtered in-handler, store.GetClients isn't
server-scoped yet - that's a later step). Old routes untouched.
Also factors the repeated serverID validation guard in jsondb.go's new
server-scoped methods into one validateServerID() helper, per a code
simplification review.
The from-scratch Go rewrite had unresolved bugs (missing go.sum, UI
404s, path issues) from being built without a working local Go
toolchain to verify against. Switching strategy: use the actual
upstream wireguard-ui codebase (proven, battle-tested single-server
manager) as the base, and extend it for multi-server support instead
of re-deriving everything from zero.
Kept our own installers (bootstrap.sh, update.sh, scripts/install.sh,
scripts/proxmox-install.sh) - these still apply, just need updating
to build/install the upstream module layout instead of the old
cmd/wireguard-ui-multi structure.
Module path intentionally left as upstream's own
(github.com/ngoduykhanh/wireguard-ui) for now to avoid touching every
internal import; revisit if this needs to be fully rebranded.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
